Products

Sort by:
Filter
BR-11 Bow Roller - Polish Finish

BR-11 Bow Roller - Polish Finish

This small universal utility 11" (27.94 cm) long bow roller and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up tp 35 Lb (15.87 Kg). Our BR-11 POLISH FINISH bow roller is immersed in a temperature-controlled bath of electrolyte to remove surface impurities, leaving a satin-like finis...


More Info
BR-15 Bow Roller - Polish Finish

BR-15 Bow Roller - Polish Finish

This universal bow roller has bent tabs that control the rode, providing protection from chafing. It is 15 7/16" (39.21 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Slip-Ring and Plow style anchors up to 35 Lb (15.88 Kg). Our BR-15 POLISH FINISH bow roller is immersed in a temperature-controlled bath of electro...


More Info
BR-16 Bow Roller - Polish Finish

BR-16 Bow Roller - Polish Finish

This bow roller has three pin positions which secures the anchor when stowed. Each roller has bent tabs that control the rode, providing protection from chafing. It is 15 1/2" (39.37 cm) in length and is suited for our QuickSet anchor as well as Plow style anchors up to 35 Lb (15.88 Kg). Our BR-16 POLISH FINISH bow roller is immersed in a temper...


More Info
BR-20 Bow Roller - Mirror or Polish Finish

BR-20 Bow Roller - Mirror or Polish Finish

This universal bow roller has extended tabs that rest against pivoting fluke anchors and hold the anchor securely in place with the rounded bail controlling the rode. It is 19 11/16" (50 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 35 Lb (15.87 Kg). Our BR-20 ...


More Info
BR-20L Bow Roller - Mirror or Polish Finish

BR-20L Bow Roller - Mirror or Polish Finish

This universal bow roller has extended tabs that rest against pivoting fluke anchors and hold the anchor securely in place with the rounded bail controlling the rode and is 3" longer than our BR-20 bow roller. It is 22 11/16" (57.63 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow st...


More Info
BR-20LL Bow Roller - Mirror or Polish Finish

BR-20LL Bow Roller - Mirror or Polish Finish

This universal bow roller has extended tabs that rest against pivoting fluke anchors and hold the anchor securely in place with the rounded bail controlling the rode and is 7 3/4" longer than our BR-20 bow roller. It is 27 7/16" (69.69 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow...


More Info
BR-21 Bow Roller - Polish Finish

BR-21 Bow Roller - Polish Finish

This pivoting bow roller is designed for use with a windlass, allowing the anchor to self-launch. With two pivot points, it allows you control the roller extension and the stowed position of the anchor. It is 20 15/16" (53.18 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anc...


More Info
BR-22 Bow Roller - Polish Finish

BR-22 Bow Roller - Polish Finish

When this bow roller is used with a windlass, the twin rollers hold the anchors secure, while the forward tabs rest against the flukes of the anchor. It is 19 1/2" (49.53 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors between 20 to 50 Lb (9.07 to 22.67 Kg)...


More Info
BR-22L Bow Roller - Polish Finish

BR-22L Bow Roller - Polish Finish

When this bow roller is used with a windlass, the twin rollers hold the anchors secure, while the forward tabs rest against the flukes of the anchor and is 4" longer than our BR-22. It is 23 1/2" (59.69 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors betwee...


More Info
BR-23 Bow Roller - Polish Finish

BR-23 Bow Roller - Polish Finish

This bow roller has three pin positions which secures the anchor when stowed. Each roller has bent tabs that control the rode, providing protection from chafing. It is 22 3/4" (56.97 cm) in length and is suited for our QuickSet anchor as well as Plow style anchors up to 60 Lb (20.41 Kg). Our BR-23 POLISH FINISH bow roller is immersed in a temper...


More Info
BR-24 Bow Roller - Polish Finish

BR-24 Bow Roller - Polish Finish

This universal bow roller has extended tabs that rest against pivoting fluke anchors and hold the anchor securely in place with the rounded bail controlling the rode. It is 23 7/16 " (59.53 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 80 Lb (36.29 Kg). Our BR-...


More Info
BR-25 Bow Roller - Polish Finish

BR-25 Bow Roller - Polish Finish

This bow roller is intended to be mounted on the bow or at the end of a pulpit. It features an overhang that allows the anchor to be easily deployed and lowered without hitting the boat itself. It is 21 3/4" (55.24 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to ...


More Info