Products
BR-22 Bow Roller - Polish Finish
When this bow roller is used with a windlass, the twin rollers hold the anchors secure, while the forward tabs rest against the flukes of the anchor. It is 19 1/2" (49.53 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors between 20 to 50 Lb (9.07 to 22.67 Kg)...
BR-22L Bow Roller - Polish Finish
When this bow roller is used with a windlass, the twin rollers hold the anchors secure, while the forward tabs rest against the flukes of the anchor and is 4" longer than our BR-22. It is 23 1/2" (59.69 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors betwee...
Bruce-25 Bow Roller - Mirror or Polish Finish
This bow roller is 24 11/16" (62.70 cm) in length, has three wheels, four pin positions and is specifically designed to self-launch Bruce and Claw anchors up to 50 Lb (22.68 Kg). Our Bruce-25 MIRROR FINISH bow roller is mechanically and hand buffed removing surface impurities creating a high-buff finish that won’t rust. Our Bruce-25 POLISH FINIS...
Delta-20 Bow Roller - Mirror or Polish Finish
This heavy-duty bow roller has a quick release pin that is adjustable to help secure the anchor while stowed. The bow roller hangs low on the bow to keep the anchor out of sight lines. It is 18 1/2" (49.99 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors up ...
Delta-23 Bow Roller - Mirror or Polish Finish
This bow roller hangs low on the bow to keep the anchor out of sight lines. The top of each side has a flange for extra strength, with the forward end flared to reduce chafing. A heavy duty fully welded bail also controls the rode. It is 23 1/4" (59.10 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, S...
