Fluke

Sort by:
Filter
BR-35 Bow Roller - Polish Finish

BR-35 Bow Roller - Polish Finish

This bow roller has three pin positions which secures the anchor when stowed. Each roller has bent tabs that control the rose, providing protection from chafing. It is 35" (89 cm) in length and is suited for our QuickSet anchor as well as Plow style anchors up to 80 Lb (36.3 Kg) Our BR-35 POLISH FINISH bow roller is immersed in a temperature-con...


More Info
Delta-23 Bow Roller - Mirror or Polish Finish

Delta-23 Bow Roller - Mirror or Polish Finish

The bow roller hangs low on the bow to keep the anchor out of sight lines. It is 23 1/2" (59.69 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors up to 50 Lb (22.68 Kg). Our Delta-23 MIRROR FINISH bow roller is mechanically and hand buffed removing surface im...


More Info
BR-20LL Bow Roller - Mirror or Polish Finish

BR-20LL Bow Roller - Mirror or Polish Finish

This universal bow roller has extended tabs that rest against pivoting fluke anchors and hold the anchor securely in place with the rounded bail controlling the rode and is 7 7/8" longer than our BR-20 bow roller. It is 27 1/2" (69.85 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow ...


More Info
E-44 Bow Roller - Mirror Finish

E-44 Bow Roller - Mirror Finish

This platform bow roller is meant to be flush mounted to the bowsprit or pulpit, with the anchor stowed and flukes resting below the bowsprit. It is 43 3/16" (109.70 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight and Slip-Ring style anchors up to 80 Lb (36.29 Kg). Our E-44 MIRROR FINISH bow roller is ...


More Info
BR-26 Bow Roller - Polish Finish

BR-26 Bow Roller - Polish Finish

This universal bow roller has extended tabs that rest against pivoting fluke anchors and hold the anchor securely in place with the rounded bail controlling the rode. It is 26 " (66.04 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 50 Lb (22.68 Kg). Our BR-26 P...


More Info
BR-25 Bow Roller - Polish Finish

BR-25 Bow Roller - Polish Finish

This bow roller is intended to be mounted on the bow or at the end of a pulpit. It features an overhang that allows the anchor to be easily deployed and lowered without hitting the boat itself. It is 21 3/4" (55.24 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to ...


More Info
BR-24 Bow Roller - Polish Finish

BR-24 Bow Roller - Polish Finish

This universal bow roller has extended tabs that rest against pivoting fluke anchors and hold the anchor securely in place with the rounded bail controlling the rode. It is 23 1/5 " (59.69 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 50 Lb (22.68 Kg). Our BR-2...


More Info
BR-15 Bow Roller - Polish Finish

BR-15 Bow Roller - Polish Finish

This universal bow roller has bent tabs that control the rode, providing protection from chafing. It is 15 1/2" (39.37 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Slip-Ring and Plow style anchors up to 35 Lb (15.88 Kg). Our BR-15 POLISH FINISH bow roller is immersed in a temperature-controlled bath of electrol...


More Info
BR-2 Bow Roller - Polish Finish

BR-2 Bow Roller - Polish Finish

This small universal utility 6 1/6" (15.24 cm) long bow roller and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 14 Lb (6.35 Kg). Our BR-2 POLISH FINISH bow roller is immersed in a temperature-controlled bath of electrolyte to remove surface impurities, leaving a satin-like fini...


More Info
Delta-20 Bow Roller - Mirror or Polish Finish

Delta-20 Bow Roller - Mirror or Polish Finish

This heavy-duty bow roller has a quick release pin that is adjustable to help secure the anchor while stowed. The bow roller hangs low on the bow to keep the anchor out of sight lines. It is 18 1/2" (49.99 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors up ...


More Info
CQR-40 Bow Roller - Polish Finish

CQR-40 Bow Roller - Polish Finish

This heavy-plate bow roller is 19 3/4" longer than our CQR-20 and 9 1/16" longer than our CQR-30 bow roller. It is 39" (99.06 cm) in length and is suited for our QuickSet anchor as well as CQR, Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 140 Lb (63.50 Kg). Our CQR-40 POLISH FINISH bow roller is immersed in a temperature-...


More Info
CQR-30 Bow Roller - Polish Finish

CQR-30 Bow Roller - Polish Finish

This heavy-plate bow roller is 10 1/8" longer than our CQR-20 bow roller. It is 29 3/8" (74.61 cm) in length and is suited for our QuickSet anchor as well as CQR, Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 75 Lb (34.01 Kg). Our CQR-30 POLISH FINISH bow roller is immersed in a temperature-controlled bath of electrolyte t...


More Info