Products

Sort by:
Filter
BR-16 Bow Roller - Polish Finish

BR-16 Bow Roller - Polish Finish

This bow roller has three pin positions which secures the anchor when stowed. Each roller has bent tabs that control the rode, providing protection from chafing. It is 15 1/2" (39.37 cm) in length and is suited for our QuickSet anchor as well as Plow style anchors up to 35 Lb (15.88 Kg). Our BR-16 POLISH FINISH bow roller is immersed in a temper...


More Info
BR-22 Bow Roller - Polish Finish

BR-22 Bow Roller - Polish Finish

When this bow roller is used with a windlass, the twin rollers hold the anchors secure, while the forward tabs rest against the flukes of the anchor. It is 19 1/2" (49.53 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors between 20 to 50 Lb (9.07 to 22.67 Kg)...


More Info
BR-22L Bow Roller - Polish Finish

BR-22L Bow Roller - Polish Finish

When this bow roller is used with a windlass, the twin rollers hold the anchors secure, while the forward tabs rest against the flukes of the anchor and is 4" longer than our BR-22. It is 23 1/2" (59.69 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors betwee...


More Info
BR-23 Bow Roller - Polish Finish

BR-23 Bow Roller - Polish Finish

This bow roller has three pin positions which secures the anchor when stowed. Each roller has bent tabs that control the rode, providing protection from chafing. It is 22 3/4" (56.97 cm) in length and is suited for our QuickSet anchor as well as Plow style anchors up to 60 Lb (20.41 Kg). Our BR-23 POLISH FINISH bow roller is immersed in a temper...


More Info
BR-25 Bow Roller - Polish Finish

BR-25 Bow Roller - Polish Finish

This bow roller is intended to be mounted on the bow or at the end of a pulpit. It features an overhang that allows the anchor to be easily deployed and lowered without hitting the boat itself. It is 21 3/4" (55.24 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to ...


More Info
BR-35 Bow Roller - Polish Finish

BR-35 Bow Roller - Polish Finish

This universal bow roller is perfect for use where a long extension is needed, or to contain an anchor shank so that it does not hit the deck when being deployed or raised. It is 34 15/16" (89 cm) in length and is suited for our QuickSet anchor as well as Plow style anchors up to 80 Lb (36.3 Kg) Our BR-35 POLISH FINISH bow roller is immersed in ...


More Info
Bruce-25 Bow Roller - Mirror or Polish Finish

Bruce-25 Bow Roller - Mirror or Polish Finish

This bow roller is 24 11/16" (62.70 cm) in length, has three wheels, four pin positions and is specifically designed to self-launch Bruce and Claw anchors up to 50 Lb (22.68 Kg). Our Bruce-25 MIRROR FINISH bow roller is mechanically and hand buffed removing surface impurities creating a high-buff finish that won’t rust. Our Bruce-25 POLISH FINIS...


More Info
CQR-20 Bow Roller - Polish Finish

CQR-20 Bow Roller - Polish Finish

This heavy-plate bow roller is 19 5/16" (49.05 cm) in length and is suited for our QuickSet anchor as well as Plow and CQR Plow style anchors up to 50 Lb (22.68 Kg). Our CQR-20 POLISH FINISH bow roller is immersed in a temperature-controlled bath of electrolyte to remove surface impurities, leaving a satin-like finish that won’t rust. Features ...


More Info
CQR-30 Bow Roller - Polish Finish

CQR-30 Bow Roller - Polish Finish

This heavy-plate bow roller is 10" longer than our CQR-20 bow roller. It is 29 5/16" (74.45 cm) in length and is suited for our QuickSet anchor as well as CQR, Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 75 Lb (34.01 Kg). Our CQR-30 POLISH FINISH bow roller is immersed in a temperature-controlled bath of electrolyte to r...


More Info
CQR-40 Bow Roller - Polish Finish

CQR-40 Bow Roller - Polish Finish

This heavy-plate bow roller is 13 1/4" longer than our CQR-20 and 3 1/4" longer than our CQR-30 bow roller. It is 32 9/16" (92.71 cm) in length and is suited for our QuickSet anchor as well as CQR, Fluke, Danforth, Lightweight, Slip-Ring and Plow style anchors up to 140 Lb (63.50 Kg). Our CQR-40 POLISH FINISH bow roller is immersed in a temperat...


More Info
Delta-20 Bow Roller - Mirror or Polish Finish

Delta-20 Bow Roller - Mirror or Polish Finish

This heavy-duty bow roller has a quick release pin that is adjustable to help secure the anchor while stowed. The bow roller hangs low on the bow to keep the anchor out of sight lines. It is 18 1/2" (49.99 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, Slip-Ring, Plow and Bruce/Claw style anchors up ...


More Info
Delta-23 Bow Roller - Mirror or Polish Finish

Delta-23 Bow Roller - Mirror or Polish Finish

This bow roller hangs low on the bow to keep the anchor out of sight lines. The top of each side has a flange for extra strength, with the forward end flared to reduce chafing. A heavy duty fully welded bail also controls the rode. It is 23 1/4" (59.10 cm) in length and is suited for our QuickSet anchor as well as Fluke, Danforth, Lightweight, S...


More Info